Better circulate water through your pool with the help of this Intex 26004E Above Ground Swimming Pool Inlet Air Nozzle Replacement Part Set• This pool jet replacement part kit works with pool filter pumps with 1,050 to 1,900 gallons per hour flow rates• You can use these pool jet replacement parts with any Intex above-ground pool• The replacement part set includes 1 plunger valve with O-ring (10747), 2 strainer connectors for 1.25-inch fitting (11070), 2 strainer grids (11072), and 1 pool inlet air nozzle set (12354)• Pool inlet air nozzle set includes the jet exterior, O-ring, fittings compatible with other set parts• Keep the water moving in your pool with this Intex 26004E Above Ground Swimming Pool Inlet Air Nozzle Replacement Part Set.

Keep your pool water flowing this summer with Intex 1.5 and 1.25 Inch Above Ground Inlet and Outlet Fittings Set•This set comes complete with 1 plunger valve assembly, 2 strainer connectors for 1-1/4" fittings, 2 strainer grids, and1 pool inlet air nozzle•Trust you are using the best replacements parts for your swimming pool when you use the Intex 1.5 and 1.25 -Inch Above Ground Inlet and Outlet Fittings Set that was designed for your pool•Keep an extra set on hand so you do not lose any swimming time this summer.

Intex Replacement Plunger Valve•Fits Intex above ground pools 18' and larger
•2-1/2" threads
•Connects to 1-1/2" hose
•Genuine Intex replacement part # 10747

Pool Above Type B Hose Adapters for INTEX Pools (Pair/Set of 2) The Type B Hose Adapter converts INTEX pools with 1.25" fittings to 1.5" fittings. These hose adapters will be needed when upgrading from a low flow pump system (1000 GPH or smaller) to a larger pump system (1500 GPH or larger).

Intex Replacement Plunger Valve•Fits Intex above ground pools 18' and larger
•2-1/2" threads
•Connects to 1-1/2" hose
•Genuine Intex replacement part # 10747

2 Pack Intex 1.25" Accessory Hose•Suitable for Intex filter pumps and saltwater systems that use 1-1/4" (32mm) hoses
•59" (150cm) length hose

Large Strainer Rubber Washer and Ring Pack• Includes: (4) Intex Replacement Rubber Washer & Ring Pack for Large Pool Strainers
• Replace your Intex 18' and larger Pool Strainers, requires 1.5" inside diameter hoses to use
•Each unit includes: (4) 1-1/2" O-Rings (10262), (4) 2-1/4" Step Washers (10745), (4) 3-7/8" Flat Gaskets (10255)
• Used with Intex Models 28633, 28635 and 28621
• Part #: 25006

Intex Type B Pool Adapter•New style Intex B Adapter
•Converts pools with 1.25" fittings to 1.5" fittings
•Needed when upgrading a smaller Intex pump (1000 gph or smaller) to a 1500 gph or larger pump
•For use with 8'-16' pools when upgrading to a larger pump or saltwater system
•2 adapters needed for initial upgrade (4 included in this listing)

Intex 1.25" Accessory Hose•Suitable for Intex filter pumps and saltwater systems that use 1-1/4" (32mm) hoses
•59" (150cm) length hose

Intex Type B Pool Adapter•New style Intex B Adapter
•Converts pools with 1.25" fittings to 1.5" fittings
•Needed when upgrading a smaller Intex pump (1000 gph or smaller) to a 1500 gph or larger pump
•For use with 8'-16' pools when upgrading to a larger pump or saltwater system
•2 adapters needed for initial upgrade (2 included in this listing)

•Intex Rubber Washer Replacement Part
•Replace worn out parts
•For use with Intex strainer connectors 11235, 11236, and 10774
•Approx 3-7/8" - outside diameter ; Approx 2-3/4" - inside diameter
•Part #: 10255

Intex Above Ground Pool Plunger Valve Replacement Part (2 Pack) Replacement pool filter pump plunger on/off valve to be used with Intex aboveground pools using 1-1/2" diameter hoses with 2-1/2" threaded connector fittings Replace your old plunger valve(s) or upgrade to the Intex Plunger Valve system, makes changing hoses and pumps a breeze Assembly includes a plunger valve, hose o-ring, and step washer For use with 28635EG, 28633EG, 28671EG, 28645EG, 28647EG, 28651EG, 28677EG, & 28681EG filter pumps Part number: 25010 Intex Replacement Hose Adapter B with Collar (Pair) Designed for connecting 1.5-inch and 38mm pool hoses to plunger valves and other pieces of equipment Required for upgrading from an Intex 530 GPH or 1000 GPH filter pump to an Intex 1500 GPH or larger system Allow filter pumps to be used on 16-inch and smaller Intex above ground pools Reduce the large filter pump’s 1.5-inch screw on hoses down to a 1.25-inch clamp on the pool inlet and outlet ports Includes 2 adapters Part number: 25009-Pair We know that wear and tear can happen to anything. Even the Intex Plunger Valve for your pool can take a beating from time to time. We carry the Intex Plunger Valve, so you can replace that part when the time comes.This assembly includes 2 plunger valves, 2 hose o-rings, 2 step washers, and 2 hose adapters.Even our durable Intex pumps need a little maintenance after a few years of excellent operation. Keep your pump running at top efficiency with this pair of Intex Replacement Hose Adapter B with Collars.These are genuine Intex OEM replacement parts so you know they will keep your pool safe and working properly.These adapters are required for upgrading from an Intex 530 GPH or 1000 GPH filter pump to an Intex 1500 GPH or larger system. They allow the filter pumps to be used on 16-inch and smaller Intex above ground pools by reducing the large filter pump’s 1.5-inch screw on hoses down to a 1.25-inch clamp on the pool inlet and outlet ports.

Bestway Hose Adapter•Made from durable, corrosion-proof materials
•This adaptor connects hoses with 1.5" (38mm) diameter to pool valves with 1.25" (32mm) diameter
•Easy to install
•For use with 1500gph and 2500gph filter pumps and 1500gph and 2000gph sand filter pumps
•Includes 2 adapters

Intex Replacement Plunger Valve•Fits Intex above ground pools 18' and larger
•2-1/2" threads
•Connects to 1-1/2" hose
•Genuine Intex replacement part # 10747

Intex Replacement Leg Caps for 18-24' Metal Frame Pools•4 replacement leg caps
•For use with 2016 and newer 18'-24' Intex Metal Frame Pools
•Compatible with Intex Model #'s: 28251EH, 28261EH
•Part # 12139

Intex Type B Pool Adapter•New style Intex B Adapter
•Converts pools with 1.25" fittings to 1.5" fittings
•Needed when upgrading a smaller Intex pump (1000 gph or smaller) to a 1500 gph or larger pump
•For use with 8'-16' pools when upgrading to a larger pump or saltwater system
•2 adapters needed for initial upgrade (1 included in this listing),

Intex Replacement Air Release Valve and O-Ring•For use with Intex Filter Pumps
•Includes 2 Air Release/Sediment Valves and 2 O-Rings
•Genuine Intex replacement part # 10460, 10264

Intex Replacement Leg Caps for 13-16' Metal Frame Pools•4 replacement leg caps
•For use with 2016 and newer 13'-16' Intex Metal Frame Pools
•Compatible with Intex Model #'s: 28221EH, 28233EH, 28235EH
•Part # 12138

•Includes: Intex Skimmer hook (10502) and Adjuster (10522)
•Works with Intex skimmer part # 28000E
•Part #: 25014