Air Mattress Repair Patch Glue Kit with Grey Fabric
Regular price
$10.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Aerobed air mattresses. It includes one Pool Above Glue Kit (24895) and five 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Durabeam Deluxe Single High Airbeds. It includes one Pool Above Glue Kit (24895) and three patches that measure 2.6875" X 3.75" (68mm x 95mm) each. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Heavy Duty Vinyl Repair Patch Kit for Inflatables Boat Raft Kayak Air Beds …
Regular price
$9.95
This Pool Above patch kit includes a glue kit and eight 3 inch heavy duty vinyl circles in your choice of color. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Ultra Frame Pool Liner | Vinyl Glue | Patch Kit
Regular price
$9.95
This repair kit includes heavy duty 1000 denier reinforced vinyl coated fabric rounds, with Vinyl Pool Repair Kit. Repair Kit Includes: (2) 9.5cm x 20cm vinyl sheets; 1 fl oz. (30ml) tube of vinyl cement; Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for airbeds and is sourced from 69631 Intex Supreme Air-Flow Mattresses. It includes one Pool Above Glue Kit (24895) and two patches that measure 2.6875 X 3.75" each. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Inflatable Empire Chair | Vinyl glue | Green and Black Patches
Regular price
$9.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Green Empire Chair. It includes one Pool Above Glue Kit (24895) and four 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Inflatable Empire Chair | Vinyl glue | Orange and Black Patches
Regular price
$9.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Orange Empire Chair. It includes one Pool Above Glue Kit (24895) and four 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Inflatable Empire Chair | Vinyl glue | Pink and Black Patches
Regular price
$9.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Pink Empire Chair. It includes one Pool Above Glue Kit (24895) and four 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Underwater Pool Repair Kit | Vinyl glue | Blue and White Pool Liner Patches
Regular price
$14.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for pool liners. It includes one Pool Above Glue Kit (24895) and eight round patches that measure 2.625". The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for River Run Tube | Vinyl Glue | 5.5"x8.5" Vinyl Patches
Regular price
$10.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex River Run I, River Run II and River Run Connect Lounges. It includes one Pool Above Glue Kit (24895) and two patches that measure 5.5" x 8.5". The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Repair Kit for Luxury Lounge Tube | Vinyl glue | Blue and White Patches
Regular price
$9.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Bestway Luxury Lounge. It includes one Pool Above Glue Kit (24895) and four 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
2x Violet 4x10" Vinyl+ Repair Kit for Inflatables Boat Raft Kayak Air Beds
Regular price
$12.99
This repair kit includes heavy duty 1000 denier reinforced vinyl coated fabric strips with Vinyl Pool Repair Kit. Repair Kit Includes: (2) 9.5cm x 20cm vinyl sheets; 1 fl oz. (30ml) tube of vinyl cement; Recommended age 14+ Application instructions: Clean and dry the repair area thoroughly. Cut the vinyl material to the desired patch size. Apply adhesive to the back of the patch. Press the patch firmly on the repair area and hold temporarily. For best results, apply weight to the patch and allow 24 hours to reach full bond strength. Works under water.
Heavy Duty Vinyl Repair Patch Kit for Inflatables Boat Raft Kayak Air Beds
Regular price
$12.99
This Pool Above patch kit includes a glue kit and two 4x10 inch heavy duty vinyl rectangles in your choice of color. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Easy Set, Fast Set, Frame Set Pool Liner | Vinyl Patches and Glue
Regular price
$14.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Easy Set Pool liners. It includes one Pool Above Glue Kit (24895) and eight 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Power Steel Frame Pool | Vinyl glue | Gray and Multi Patches
Regular price
$9.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for pool liners. It includes one Pool Above Glue Kit (24895) and six round patches that measure 2.625". The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Supreme Air-Flow Mattress. It includes one Pool Above Glue Kit (24895) and four 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Oval Power Pool | Vinyl Glue | Gray Blue Multi Patches
Regular price
$10.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Bestway Oval Power Pools. It includes one Pool Above Glue Kit (24895) and four patches that measure 2.5" x 7.5". The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Sit n Float Lounge | Vinyl glue | Green and Clear Patches
Regular price
$9.95
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Sit ‘n Float Lounge Tubes. It includes one Pool Above Glue Kit (24895) and six 2.625” round vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
Repair Kit for Dura Beam Deluxe Airbed | Vinyl glue | Multi Color Patches
Regular price
$10.99
At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Dura Beam Deluxe Single High Airbed and will work with other Intex Dura Beam airbeds. It includes one Pool Above Glue Kit (24895) and three patches that measure 2.6875 X 3.75" each. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+
Application instructions:
Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling.
Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over.
Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over.
Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.